MLAE Alco
meter-II is manufactured indigenously
using electro chemical fuel cell. The
unit has a built in printer and rechargeable
battery.
The set
consists of following units:
1. MLAE
hand held sensor unit
2. MLAE Main Unit with in built printer
3. AC DC adaptor for battery charging
4. RS 232 cable
5. Software package CD to download data
to PC
6. Paper roll
7. Blow Pipes
| 1 |
Sensor |
Electrochemical fuel cell |
| 2 |
Measuring Range |
00mg/100 ml to 350mg/100 ml |
| 3 |
Set limit |
00 mg to 25 mg within limit 25 mg
to 200 mg High Above 200 mg Very High |
| 4 |
Accuracy |
+/-10% at 80 mg/100ml |
| 5 |
Units of measurement |
Mg/100ml,% BAC and 0/00 BAC |
| 6 |
Display format |
Serial no, date, time, alcohol content.Between
25 to 200 mg will show H Above 200mg
will show V.H |
| 7 |
Memory |
9999 memories with date, time and
alcohol content. Will remain even
in case power is switched off. Data
stored in FIFO order. |
| 8 |
Printer |
In built dot matrix plain paper
printer.Will print Serial no, date,
time, alcohol content. Facility to
enter name, address, license no, vehicle
no, name of the officer to the system
and then print out can be taken. |
| 9 |
PC Connectivity |
Can download entire data to PC through
RS 232 port |
| 1o |
Switches and buttons |
On/Off, Unit, Up, Down, Feed, Erase,
Print, transfer, Start and alphanumeric
key buttons to enter name. |
| 11 |
Power source |
Built in rechargeable battery |
| 12 |
Battery charger |
AC DC charger for charging the batter |
| 13 |
Blowing pressure |
1.2 PSI |
| 14 |
Operating temperatures |
10 to 40 degree Celsius |
| 15 |
Relative humidity |
40 to 90% |
| 16 |
Sampling rate |
Approximately 5 seconds |
| 17 |
Blow pipe |
Straws |
| 18 |
Accessories |
Software to download data to PC,
RS 232 cable, battery charging adaptor,
blow pipes and paper roll. |
| 19 |
Packing |
In an easy carry case. |
| |
|
|
- Breath Analyser